NEW $60K HELAC PT12 160 DEGREE TILT Q/C COUPLER & 3 BUCKETS INC 96 INCH 3 YARD GRADING CLEANUP & 48 HD DIGGING BUCKET & NEW CWS DEMOLITION RAKE

NEW $60K HELAC PT12 160 DEGREE TILT Q/C COUPLER & 96 IN DITCHING GRADING CLEANUP & 48-INCH HD DIGGING BUCKET & NEW CWS 60-INCH EXTREME DUTY CLEARING DEMOLITION RAKE - CHUCK BLADE FOR 240-390 CLASS EXCAVATOR

Take advantage of this new custom-built system, custom-eared to fit both buckets and the demo-clearing rake, for $30,000.00.

NOTE: THE NEW, NEVER-USED HELAC PT12 (HELAC'S BIGGEST) WRIST Q/C COUPLER IS WORTH OVER $16,000.00 USD ($22,000.00 CDN), PLUS, HAS A 6-MONTH LEAD TIME FROM PARKER.

THIS SYSTEM MAKES THE TWIN CYLINDER 45 DEGREE WRIST BUCKETS A JOKE AND LAST FOR 10,000 PLUS HOURS WITHOUT WORN OUT BUSHINGS AND CREEPING CYLINDERS - PLUS ALL BUCKETS - BLADES - HAMMERS - GRAPPLES CAN BE USED ON THE ONE QUICK CHANGE COUPLER.

THIS SYSTEM REPLACES V BUCKETS TO KEEP YOUR TRENCH OR EXCAVATION TO WCB APPROVED SLOPES AND ALLOWS YOU TO DIG FOUNDATIONS OR EXCAVATIONS TO LEVEL GRADE WITHOUT CONSTANTLY MOVING THE MACHINE - SAVING ON FINALS AND UNDERCARRIAGE WEAR - IT IS A NO BRAINER - THIS SYSTEM ROCKS 

The attachments can be quickly removed by driving one pin and used on the other two custom-built or rebuilt buckets and the new CWS torque tube rake to fit this coupler.

This system would cost well over $60,000.00 to replace, plus 6 months to order and build, plus shipping, etc.

Contact Frank at 604-476-7777. We ship quickly and offer great rates.

We can have all four pieces professionally sandblasted and painted for $2000.00.

Use as a mechanical quick-change coupler where you only need to drive one pin to quickly change buckets but gives you a full-time wrist coupler. Or grab this with any hydraulic pin grabber coupler that accepts 90 or 100 mm pins to give you two buckets and extreme duty clearing rake or demolition blade.

This coupler has 16.25 inches between the ears and 19.25 inches center to center on pins and fits the following machines:

• Case: CX330, 9050B, CX240, CX290, CX330
• Caterpillar: 325C W/ D LINK, 330B W/ D LINK, 330C W/ D LINK, 330D W/ D LINK, 330D L W/ DB LINK
• Daewoo: SOLAR 290LC-V, SOLAR 300LC-V SLR, DX 300 LC
• JCB: JS260, JS330
• John Deere: 240D LC, 270D LC
• Kobelco: SK 250LC, SK 290LC, SK 330LC
• Komatsu: PC 300-6, PC 300HD-6, PC 300LC-7, PC 350-8, PC 370HD-10, PC 370LC-10
• Link-Belt: 240LX 3.54, 290LX 3.54, 330LX, 3400 QUANTUM, 3900 QUANTUM, 4300 QUANTUM 3.54
• Volvo: EC240B, EC290B

PDF on the HELAC COUPLER: Link - CLICK HERE

Web page on the HELAC COUPLER: Link - CLICK HERE

We can ship quickly and get great rates. For inquiries, contact Frank at 604-476-7777.

New CAT BUILT 96” Tilt Ditch Cleaning Bucket for 250 - 390 CLASS Excavator - Bolt On Cutting Edge

Style: Pin Grabber OR Pin On

Pins: 90mm

Centers: 19.25”

Ears: 16.25”

Weight: 4500 lbs

Capacity: 2.6 - 3 + Cubic Yards

Design

• Versatility and efficiency at the forefront
• Helac allows for 160° total rotation (80° each direction)
• Hydraulic hoses routed in bucket assembly provide protection at all times
• Dual radius design allows for level grading on uneven terrain

Construction

• Reinforced AR400 Steel in All Wear Areas
  • Base Edge, Thickened Side Plates, Cheek Plates, and Horizontal Wear Strips.
• Equipped with Bolt-On Cutting Edge extends life of base edge and provides a smooth grading finish
• Built to handle the toughest conditions and proven durability

Performance

• Smooth and easy cuts make the tilt bucket ideal for any job related to sloping, trenching, grading, or ditch cleaning
• Maneuver effortlessly in awkward or tight areas
• Easy adjustment of tilting speed/angle
• Design allows for the maximum amount of material to be moved with each load

Fit

• Designed to fit most major brands
  • Cat, Case, Deere, Hitachi, Hyundai, Komatsu, Kobelco, Kubota, New Holland, Takeuchi, and more.
• Specifically designed to be used by direct pin on or with a pin grabbing coupler.
• Hoses not included.

All of the buckets and blades come with a set of pins at no extra charge. Call, email, or message today at 604-476-7777 for inquiries.

Introducing the new $50,000 HELAC PT12 160 Degree TILT Quick Coupler with a 96-inch Ditching Cleanup Bucket, a 48-inch Heavy-Duty Digging Bucket, and a 60-inch Extreme Duty Demolition Rake equipped with a Chuck Blade for 240-390 CL Excavators. This custom-built system, including all buckets, is now available for $30,000.00.

Inside Parker Helac’s rotary actuator technology

PowerTilt uses an innovative sliding-spline operating technology to convert linear piston motion into powerful shaft rotation. Each actuator is composed of a housing and two moving parts – the central shaft and piston. As hydraulic pressure is applied, the piston is displaced axially, while the helical gearing on the piston OD and housing’s ring gear cause the simultaneous rotation of the piston. PowerTilt’s end caps, seals and bearings all work in tandem to keep debris and other contaminants out of the inner workings of the actuator, prolonging product life and reducing required maintenance.

Applications

The PowerTilt can be used with a variety of attachments. Coast Range mainly uses it for grading projects but some projects have seen the need to attach standard or narrow buckets.

• Drainage site work: Whether Coast Range is creating a drainage system for a commercial or residential site or digging out dirt for a septic system the PowerTilt can make the finished look impressive.
• Site development: They can easily work on cutting through slopes and swales without moving the machine several times. With the 180 degrees rotation on the PowerTilt they are able to slope and grade the site with one machine.
• Dock building: The PowerTilt is used as a pile driver to push the pilings of the dock down into the ground under the water. Ray will tilt the PowerTilt at an angle to be able to drive the piling into the ground better.
• Rock: The River Teeth attachment with the PowerTilt helps Coast Range rip through rocks in the soil. They can position the PowerTilt at angle to rip rocks out on a slope or ditch.

Increased productivity and equipment inventory reduction

Coast Range used to require three machines for any given project: the Hitachi excavator, a track loader and a small dozer. By adding the PowerTilt to his excavator, projects were completed one to two days faster. The small dozer was only being used an average of 90 hours a year where most machines average about 2,000 hours a year. Clapp estimates a 30 percent increase in productivity with the use of this tool. He also decided to eliminate the small dozer, and now saves one third of the time to complete the same work he used to do with the small dozer. Reduction in equipment decreases transportation costs too.

Purchasing the PowerTilt has given Ray an advantage over the competitors in the area by increasing productivity and creating a clean and more precise finished look on the jobsite. In using this tool for the past 10 years he has had no maintenance issues or downtime.

Reliability and durability 

The PowerTilt is reliable. The PowerTilt has outlasted Clapp’s machinery. Regular scheduled maintenance and greasing have been key but ten years later, Coast Range’s current PowerTilt has up to 8,000 hours on it and is still going strong with no maintenance issues. Clapp has a lot of confidence that the PowerTilt will always finish the job in any type of weather, terrain or environment in Alaska.

PowerTilt is available for equipment up to 75,000 lbs in eight sizes with standard rotation of up to 180 degrees. Each model is designed for a specific class of machinery and individually customized to fit the carrier.

More product information can be found on PowerTilt here. 

For inquiries, contact Frank at 604-476-7777. We offer quick shipping at great rates.

For an additional $2000.00, all four pieces can be sandblasted and painted.